Hello!
As in the title, can I install Vmware on Ipad?
Would I like to install Windows 7 or 10 on an Ipad that you can?
I've seen on youtube there are methods.
If there are any other news I'm looking for answers.
If you may want to install a graphics software on a ipad.
Now is coming out of the Ipad X and their processors are powerful and fast.
Thanks for answering.
Hi
I have UAG 3.0 deployed with Horizon 7.1. External access works fine but I want to lock it down so that only computers that are domain members can connect. I followed the guide for deploying with Powershell and added these lines to the ini file.
authMethods=certificate-auth && sp-auth
[CertificateAuth]
pemCerts=C:\certs\domain-cachain.pem
Both domain and non domain members get the same error message;
/opt/vmware/gateway/logs/esmanager.log shows this error when connecting
unable to retrieve client certificate from session: <sessionId>
The troubleshooting guide for UAG 3.1 says to check the client side certificate if X.509 is configured.
How should this certificate be configured?
Thanks
I noticed Horizon 7.3.2 downloads went live last night. I am unable to find any release notes or documentation for this release. VMware, are they going to be uploaded soon?
VMs provisioned with Instant clone - OS Windows 10 LTSB - are NOT receiving the Computer Based Group Policy ... I reviewed and did exactly what the VMware Knowledge base suggested as a work around but no luck on my end.
https://kb.vmware.com/kb/2150495
Any suggestions? if any one is using Windows 10 with instant clones, if you can share some tips and advice please?
Hey,
i have the problem that I want VM's (That are connected to our Prod-Lan) that are running under a vCenter (that is not Connected to our Prod-Lan) be connectable via a ConnectionServer (also in our Prod-Lan).
So i thought that I install the View Agent and set the ConnectionServer. But the Screen isn't showing up.
Is there a possibility to configurate the ViewAgend after the installation to connect to the ConnectionServer?
Thanks for the Answers
Armin
Few weeks ago my certificate expired on Connection server. I was able to request one from digicert and imported into my connection server. All setting were set properly with friendly name and such. Once I did that got green light on my connection server from View admin console. we are running just one security and connection server. At the time of upgrade of the certificate for connection server I did not notice any issue with security server so didn't go through the process of importing certificate for that as well. Started getting calls from my offshore resources they were not able to connect externally. . Since we used the same cert on both connection server and security server I went through the steps of exporting the cert out of connection server and imported back on security server. Even though I did that external clients were getting the same error when connecting to view client externally. To get this resolved support was able to assist by setting the default cert on the security server configure and making it default. Client were working fine by bypassing the certificate. Now I'm running into this issue where I cannot connect to my view admin console. keeps throwing below error. Also on the connection server View Blast Secure Gateway services are stuck on pause not matter what I do cannot get this service to start normally and view admin console is still down. At the same time I am able to connect to view externally by bypassing the certificate. Figure post this on the community before I call support where they are not able to help as current version of View that I am running is out of support and they keep telling me to upgrade which I have slated for 1st quarter 2018. Can't seem to understand why would the same cert that I have on connection server works perfectly fine and same cert that import into security server keeps giving me problems. Support seems to think it's a mismatch on the cipher but I cannot understand what I need to configure on the cert or the security server to see the correct match for the cipher. Any help would be appreciate it if anyone has run into this issue.
Can’t connect securely to this page
This might be because the site uses outdated or unsafe TLS security settings. If this keeps happening, try contacting the website’s owner.
Try this:
> View : 5.3.2
> Certificates on View servers expired couple of days ago hence certificates were replaced
> One certificate(digicert) used for both connection and security servers
> Verified server's friendly name , Subject alternate name and thumbprint
> No issue connecting internally
> Only external users are unable to connect
> External users connect via horizon client (4.3)
> Noticed cipher mismatch in certificates hence external users were unable to connect
> Pointed security server to default certificate and bypassing cert verification when connecting from external network , we were able to connect
Hi,
I am seeing one error message "Failed to perform space reclamation on" in my View
I am using View 7.1 with windows-10 as OS
any reason why I am seeing this error messages
Thank you,
Pere.
So here is the issue:
At the time of creating a new pool in view agent with my latest snapshot, the changes are not being made once i log in with a domain account. Icons from the desktop disappear and registry changes do not pick up. At the master VM level, all changes have been applied and saved.
The biggest issue is with Skype for business and OneNote, when logging in to the pool as domain user, the default email address in SFB shows someone else, where it should be blank, since its a completely new profile. I found a bunch of registry keys that were referring to this person, in the master VM, however, even after clearing all these, the person still comes up.
With OneNote, when opening for the first time as domain user in the pool, a notebook with the user name comes up, even after it was deleted from the source(share point and one drive)
This only seems to happen after creating the pool, the master VM is completely clean, unless there is something im missing?
latest I've done:
Encountered an issue when there is an app hosted in 3 RDS hosts configured as 1 farm.
The error was that it is looking for a specific path that is not available on 1 of the 3 hosts.
Checked the 3 servers and found that the app is located on the same path for 3 servers.
But the version of the app on the affected server is lower than on the 2 other servers.
We updated the app version and was able to access the app via HTML.
My question is, what is the best practice or procedure when upgrading the app version per host with no or minimum disruption to the users.
This is critical since, when the error was encountered; even for the path is the same... app will not work since there is version mismatch for the 3 hosts.
Hi
Have doubt on the VMware linked disk and how it uses the Replica disks.
1. Does Replica Disk is created for every Desktop deployed in the pOOL ? ( we generally know that replica disk are created one per DS store )
2. Though the replica disk is not visible when we browse in the Datastore using the GUI.
3. But when we browse the datastore using RVC we are seeing each linked clone desktop is associated with the Replica disk, ( and same is being reported on the storage consumption size)
Does anyone has observed this ?
Wondering if anyone can help, we are looking to introduce Brother PT-700 label printers into our environment, we currently use HP T310 Zero Clients and Windows 7 x64 desktops, we want to connect the printers locally via USB. I can install the printer onto my own VDI desktop using the drivers provided by Brother and I can print fine. The issue we have is, we run a linked clone environment where the VDI desktops refresh every 7 days and the users do not have administrator permissions to install any drivers/software themselves plus we would prefere to do it ourselves. I planned to install the printer and driver onto the main golden image so all the users have to do is connect it up, the printer/drivers will already be installed plus the virtual printer port for USB will have already been created. The issue we have is that it's not working, users can connect the printer, it recognises the printer because it also maps a drive containing Brother Ptouch software but the printer remains offline, we can re-create the printer locally using the virtual printer port and still it remains offline. I'm not sure what I'm doing wrong, the only thing I can thing of is that when the virtual printer port is created on the golden image it's mapped to that specific instance (if that makes sense?) of the printer? That port does not even list as available ports until I actually install the printer drivers onto the golden image or my test VDI desktop. I don't think this is an issue with the zero client or USB mapping etc due to the fact I can install and use the printer with no problems on my own VDI desktop.
I've got a feeling this will only work if the users themselves install the printer/drivers and connect it up during the installation process (midway through installation of the printer/drivers it asks for the printer to be connected via USB before proceeding, on the golden image install I do that myself), at which point it will create the virtual printer port for USB. Issue with that is, they would need permissions to do that and every 7 days that would need to re-install it.
Any help appreciated.
I am experiencing issues running the viewdbchk command. When connecting to the composer server, I receive the following error...
Checking connectivity...
Connecting to View Composer "https://composer1:18443". This may take some time...
** ERROR: EXCEPTION: Unable to establish a connection with View Composer: "https://composer1:18443". ; nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.s
ecurity.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target **
** ERROR: Can not continue due to connectivity errors **
Is there a way to bypass the certificate check?
So I have two domains. A production domain and a network isolated test/dev domain with VLAN isolation. I want people on their production workstations, which they are logged into with their production domain creds, to launch a view client and authenticate with a VDI desktop on the test/dev domain. I was thinking I could accomplish this by making the View Connection server have a virtual NIC on production and on test/dev. Users could hit it from prod through the prod nic, and it could broker the connection to the desktops within the dev domain. There are no trusts between these domains, but there shouldn't have to be since the connection server is joined to dev and creating desktops in dev.
The vCenter would be in production. I would just set up the vCenter connection on the view connection server with the production DNS address of vCenter and a service account on the prod domain. While the connection server is not on that prod domain, the prod domain is network accessible so it should be able to authenticate with vCenter.
Does this sound like it would work? The entire point is for as little connection between prod and dev as possible. Only the view connection server would have a connection to both in order to present a dev desktop to a prod workstation.
I have a 7.2 Horizon environment. Every now and then, using the Horizon client, I cannot launch any VM pools. They work fine using browser base on the same machine. The VDM logs shows "RemoteMKS connection failed with error 'The connection to the remote computer ended.',is not prelaunch mode". I'm using VMware BLAST. However, on the exact same machine, if I login with a different AD account, I can launch the VM pool. Also, I've deleted my local profile from the machine I'm trying to launch pools from. When I log back in, the AD account is created new and then it works which leads me to believe, somewhere in the profile, there is corruption on the Horizon client. I have published apps and they all launch, just not the VM pools.
Has anyone else seen this issue? It's not expedient to blow out the profile every time this happens as profile contain many user settings that are a pain to back up and restore. Currently am experiencing this on my main VM I use to manage the VDI environment. If anyone has info on how to resolve, that would be fantastic!
Thanks.
Hello
I am trying to find out if we can unassign users after a certain number of days of inactivity/non usage? We have 2 groups of users, one group who will use their VM's daily. and one group who will only user there desktop 1 day out of the week or month, so we have a large number of VM's that are not being utilized. Using a floating pool is out of the question due to the weird nature of our employees and turn over.
we are using Vmware Horzon view 7.1
Cheers
Hello,
Not sure if this would be the right place to ask, but I am currently running Horizon 7.3.2 environment with Windows 10 LTSB 2016 (Build 1607) instant clone desktops. The desktop image has UEM 9.2.1 and App Volumes 2.13.1 installed, and we utilize both appstacks and writable volumes to support our user's use case.
I was trying out the HTML5 redirection feature (new to 7.3.1) using Windows Horizon client 4.6.1, ensuring that the HTML5 feature is enabled on vdm_agent policies, URL configured, and Google Chrome extension for HTML5 MMR installed. When I use the published app for Chrome (installed directly on RDS server), the HTML5 MMR feature works fine. When I tried it on the desktop where Chrome is installed on the writable volume, however, the extension doesn't seems to work. The extension icon will "color" up for a moment when Chrome is launched, but will soon turn into grey. Consequently, the redirection doesn't work and will play the video on the virtual desktop itself. Not sure if anyone else notice this?
I haven't tried this with Chrome installed directly on the image, but I assume it won't work either since extension files are installed inside the user's Chrome profile directory, within the Local AppData folder in the user profile.
The App Volumes agent is configured with the necessary registry item to allow Google Chrome extensions to function (i.e. assigning a drive letter to writable volume)
Hello all,
I am trying to create an automated pool of Full VMs for use for some users. I am able to successfully create the pool, but the machines aren't changing names to the specified VM name upon creation and are keeping the name from the template. They also do not join the domain automatically. From what research I have done I believe this is supposed to occur automatically. What am I doing wrong?
I am running View and Composer 7.1 on vSphere 6.0.0
Thanks for any help,
Franklin
I have recently clicked on the desktop pool editor in view Administrator for this alert. Do you have a solution。
Hello,
Looking for some guidance on if it is possible to connect a Horizon Cloud tenant with Host infrastructure to an on-premise cloud pod environment. We are currently looking at how to expand our VDI Infrastructure next year. We are looking at expanding our two current pods, building a third pod or looking at going to the cloud. If we would go to the cloud we would still like to take advantage of cloud pod architecture, but I'm not sure that is possible.
Any advise would be appreciated.
Thanks
Jeff
We see this error rather intermittently in our environment. I wouldn't even say we see it often. When it happens, as far as we know, there are no environmental issues going on. Typically we'll see the user having the issue is actually already on a session, listed as connected in the View Admin console. What we'll then do is reset that VM, then have them authenticate again, and it seems to work. But it's kind of annoying for the user to open a ticket for such an issue. Is it something perhaps to do with the end user's connection (weak wireless signal maybe wherever they are)? Or is it something perhaps with our Horizon config we should check for. Would love to know what the root cause is that gets them to that state.
We are using today Horizon 6.2.0. Our Windows users are instructed to get whatever the latest version of the client is available.
Thanks.
